About The Printer
Liquid 3D Printer was created because of the need for a good quality printer that is reasonably priced. It has a new design with a rigid cube structure and a semi-enclosed chamber. It is fast and offers accurate prints thanks to CoreXY kinematics. The printer uses open-source hardware and high-quality components. With the contribution of the community, it can be continuously improved. If you have any questions, you can contact using the Contact section or using other platforms from the download section.
Open-source?
Yes! Our project is open-source, licensed under CC BY-NC 4.0. You can get it from our download section.
Features
How the printer stands out?
Chamber
Semi-enclosed chamber using plexiglass panels.
Kinematics
Precise and fast CoreXY Kinematics.
Structure
Rigid structure with aluminium profiles and sheets.
Controller
Duet WiFi controller with remote printing and control.
Extruder
Powerful BMG Dual-Drive Extruder with 3:1 gear ratio.
Filament Runout
Laser filament sensor for detecting runout and jamming.
Print Bed
Magnetic removable build plates with PEI surface.
Hotend
Volcano hotend for high flow and faster printing speeds.
Silent Operation
Using Trinamic motor drivers and silent fans.
Build Volume
200 mm3 build volume for printing.
Bed Leveling
Auto bed leveling in 9 points using inductive sensor / bltouch.
Power Outage
Power failure resume option for recovering prints.
Images
Renders created using Blender
Liquid photos
Printed objects
Variants
Liquid is available in multiple colors
Interactive view
Technical Specifications
How Liquid 3D Printer performs
200 x 200 x 200 mm
(7.9 x 7.9 x 7.9 inches)
460 x 480 x 650 mm
(18.1 x 18.9 x 25.6 inches)
Fused filament fabrication (FFF)
1.75
13.5 kg
(29.8 lbs)
100 - 240 VAC, 50 - 60 Hz
350 W
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 300 - 20 micron
0.8 mm nozzle: 600 - 20 micron
6.9, 6.9, 2.5 micron
Dual-geared feeder (BMG), nylon casing
Volcano hotend with auto-leveling sensor and cooling fans
0.4 mm, 0.6 mm, 0.8 mm
< 30 mm³/s
< 300 mm/s
180-280°C
< 4 minutes
< 50 dBA
Auto leveling using inductive sensor
20 - 110 °C removable magnetic heated spring steel sheet build plates with smooth / textured PEI
< 5 minutes (from 20 to 60 °C)
15 - 32 °C (59 - 90 °F)
0 - 32 °C (32 - 90 °F)
Ultimaker Cura – print preparation software
MacOS, Windows, and Linux
SolidWorks, Siemens NX, Autodesk Inventor
Ultimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG
formats: G, GCODE, GCODE.gz, UFP
Wi-Fi
Authors
The creators of the project
Alexandru GRIGORAS
Serban CHISCA